{"product_id":"buy-bison-epoxy-metal-24ml-price-online-doha-qatar","title":"BISON EPOXY METAL 24ML","description":"\u003ch1\u003eBISON EPOXY METAL 24ML\u003c\/h1\u003e\u003ch3\u003eDESCRIPTION\u003c\/h3\u003e\u003cp\u003eEPOXY METAL\u003cbr\u003eDOUBLE SYRINGE 24 ML (BLISTER)\u003cbr\u003eIronclad and metallic two-component epoxy adhesive. For repairs under extreme conditions.\u003cbr\u003ePROPERTIES\u003cbr\u003eExtreme strength: up to 220 kg\/cm²\u003cbr\u003eMetal colored\u003cbr\u003eResistant to harsh conditions\u003cbr\u003eResistant to temperatures between -40°C and +100°C\u003cbr\u003eFilling\u003cbr\u003e(Sea)water resistant\u003cbr\u003eVery good chemical resistance\u003cbr\u003eCan be sanded, filed, drilled and painted after curing\u003cbr\u003eSUITABLE FOR:\u003cbr\u003eIdeal for strong repairs of metal objects which must withstand extreme conditions (forces, vibrations, (sea)water, heavy load), such as tools, car parts, engines, (motor)bikes, metal (garden) fencing and cutlery. Also suitable for sealing a small hole in a radiator. Suitable for bonding of metal (steel, aluminum, iron) together and in combination with stone, wood, concrete, and various synthetics (such as Formica, polyester, and Bakelite).\u003cbr\u003eBEFORE USE:\u003cbr\u003eWorking conditions\u003cbr\u003eOnly apply at temperatures between +5°C and +35°C. Product cures by mixing the resin and hardener.\u003cbr\u003e\u003cbr\u003ePersonal safety\u003cbr\u003ePreferably wear gloves.\u003cbr\u003e\u003cbr\u003eSurface requirements\u003cbr\u003eThe materials to be bonded must be dry, clean, free of dust and grease.\u003cbr\u003e\u003cbr\u003ePreliminary surface treatment\u003cbr\u003eDegrease parts to be bonded with acetone. Roughen smooth surfaces (sandpaper).\u003cbr\u003e\u003cbr\u003eTools\u003cbr\u003eMix the components in the double-syringe by means of the supplied mixing bowl and spatula.\u003cbr\u003e\u003cbr\u003eDURING USE:\u003cbr\u003eHandling of packaging\u003cbr\u003eRemove the spatula from the side of the double syringe, and the closure cap from the handle. Break the seal of the double syringe.\u003cbr\u003e\u003cbr\u003eDirections for use\u003cbr\u003ePress out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with a synthetic spatula until a mixture is obtained with a homogeneous color. Apply the mixture, which at room temperature (+20°C) remains toolable for about 45 minutes, as a thin layer on one of the two materials. Join the materials and keep them in place for 10 hours. Be careful not to move the parts before the adhesive has cured. After use, clean the nozzle with a cloth and place the special cap in the handle on the double syringe. Resin and hardener must not come into contact with each other unless for usage.\u003cbr\u003e\u003cbr\u003eAdvice\u003cbr\u003eSome types of synthetics can not be joined such as polyethylene and polypropylene. This can be tested by holding a glowing copper wire against the synthetics. Does it smell of wax? Then you can not bond it.\u003cbr\u003eUse a piece of adhesive tape in order to keep the parts in place while the adhesive is curing.\u003cbr\u003ePoints of attention\u003cbr\u003eAfter use close well (note: always place back the cap in the same way, due to the bonding of the cap to the double syringe). For optimum performance, it is important to create a larger amount of adhesive and mix it very well. Curing time depends on temperature. The adhesive does not cure below +5°C.\u003cbr\u003e\u003cbr\u003eAFTER USE:\u003cbr\u003eStains\/residue\u003cbr\u003eRemove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically.\u003cbr\u003e\u003cbr\u003eStorage conditions\u003cbr\u003eStore cool, dry, frost-free, upright (nozzle upwards) and tightly closed.\u003c\/p\u003e","brand":"GMLV0073T","offers":[{"title":"Default Title","offer_id":35625146843302,"sku":"8710439039640","price":16.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0451\/6747\/6902\/products\/page-_--logo---Copy_7a58f510-56db-45f8-bbac-a8e77949e540.jpg?v=1597067097","url":"https:\/\/nakedwolfe41654684-com.myshopify.com\/products\/buy-bison-epoxy-metal-24ml-price-online-doha-qatar","provider":"nakedwolfe41654684.com","version":"1.0","type":"link"}